My Shopping Cart
Obdstar OBDSTAR X300 DP GM MDI CGDI MB SD C4 VVDI2 Scania VCI3 SDP3 NEXIQ GM TECH2 SBB
Home
Home - Products - Technical Support - how to replace fan belt?
« Go Back

how to replace fan belt?

Description

Take off the old fan belt:
Take the old belt off of the pulleys. You will need a wrench or two to release the tension on the belt. Tension systems differ between makes, but the effect of each is still the same: They maintain a tight belt when in use, and they allow you to adjust the tension. In this case, you want to reduce the tension on the belt so that you can slide it off of the pulleys.

Get the right size replacement belt:
You'll need to get the right size replacement belt at any local auto parts store. It's very important to match the new fan belt shape with the old one. Take the old belt with you to the store to compare with the new belt. Sometimes the new belt is a little bit different length. If the new belt is a centimeter or so short, then that is OK. It will likely stretch out a little bit. If the new belt is a little too long, ask the salesperson to help you find a closer match. A longer belt isn't acceptable.

Install the new belt:
When replacing fan belts, route the new belt through the pulleys so that it uses the exact same path as the old belt. You may need to loosen the belt tensioner a little bit more in order to slip the new belt onto the final pulley. Refer to the belt diagram to check your work. After the belt is in place, tighten the belt using the tension adjuster on your car.

Helpful fan belt repair tips:
The belt should be taut, and should not squeal when the engine is running. To determine if the belt is tight enough, remove anything that could get caught in moving parts and turn on the engine. Turn on the air conditioner. If the belt doesn't squeal, then the belt is probably tight enough.

When you tighten the belt, be careful not to get it too tight. A belt that is too tight will put too much stress on all of the pulleys in the system and will cause one to fail over time.

Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
*Verification Code:
      0307    No right? Get a new Verification Code
 
Share your thoughts about this item with other users. All reviews will be reviewed within two working days, aggressive reviews and spam will be blocked.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.

Search

You can search Technical Support by keyword.